It is recommended that the replacement tyre size speed rating be equal to or higher than that of the O.E. tyre-size speed rating. If a lower speed-rated tyre is selected, then the vehicle top speed becomes limited to that of the lower speed rating selected. The customer must be informed of the new speed restriction. It is quite common and permissible during winter driving to use a winter tyre with a lesser speed rating than the O.E. tyre. Again the customer must be informed, as mentioned above
The rim width range is extremely important. This range represents proper rim widths that will assist the tyre/wheel assembly in meeting its performance potential. To achieve the best balance between ride, handling and tread wear, select a rim width in the middle of the manufacturer’s range.
To improve cornering traction and steering response, choose a rim at or near the maximum recommended width. The wider the rim width, the straighter the sidewall and the quicker the steering response. Conversely, using a rim width at the low end of the range will cause the tyre to balloon or curve out, slowing steering response.
Refer to our website for tyre specifications.
The side of a tyre contains information needed for your safety and that of your customer. Being able to read sidewall markings will help you to better understand the performance of each tyre. It will also provide you with information when mounting and servicing the tyre.
Never exceed the load-carrying limits moulded on the sidewall of the tyres or the maximum vehicle axle load limit as shown on the vehicle tyre placard, whichever is less. Overloading builds up excessive heat in the tyre and could lead to failure.
Zero pressure tyres are designed to operate for a limited time with little or no air pressure without causing damage to the tyre casing. In order to realise the zero pressure benefits, the tyres must be mounted on proper wheels and the wheels must be equipped with an operational, Michelin-approved low tyre air pressure warning system.
If no instructions for tyre mixing appear in the vehicle owner’s manual, adhere to the following guidelines:
Tyres with directional tread patterns must be mounted so that the primary direction of rotation matches the directional arrows on the tyre sidewall. If all four tyres are the same size, directional tyres can be rotated front to back.
Tyres with tread patterns that are both asymmetric and directional require left and right specific tyres. Sidewall markings will identify the side of the vehicle and the primary direction of rotation for the tyre. If all four tyres are the same size, they can be rotated front to back.
You can easily find the right Michelin tyres for your car model and usage by visiting Michelin’s tyre selector you can also find the nearest dealer to obtain your new Michelin’s tyres.
It’s always good to have your tyres checked up regularly, so please visit our online training center to take full advantage of your Michelin tyres.
Michelin establishes a Recommended Retail Price (RRP) for its tyres. This price, however, is only a guide as Michelin cannot dictate the price at which authorized MICHELIN dealers sell our tyres to consumers. To obtain a quote on tyres and tyre-related services, please contact 6861 6106. Alternatively, locate your nearest dealer at here.
Proper inflation is the single most important part of tyre care. The inflation pressure on the side of the tyre is the maximum operating pressure. It is not necessarily the right inflation for your vehicle. Always use the inflation recommended by the vehicle manufacturer. You can find it in your owner's manual, posted on the edge of the driver's door, on a door post or on the inside of the glove box door. Also, don't forget to check the spare. Your Michelin dealer/retailer can answer any questions you may have about tyre inflation.